Car Stereo Amplifier Circuit

admin February 14, 2011 10 Comments

Car Stereo Amplifier Circuit

Given below is the circuit of a car stereo amplifier that can be used in cars or other vehicles. We have used TDA1553, which is a Class-B audio amplifier.

Description :

Here is the circuit of a car stereo amplifier based on TDA1553. TDA1553 is a monolithic Class-B audio amplifier which contains 2 x 22 watt amplifiers in bridge tied load configuration. The amplifier operates from 12V DC and is developed intentionaly for car audio applications. The IC also has a load of good features like short circuit protection, load dump protection, reverse polarity protection, loud speaker protection etc.

In the circuit , C5 and C4 are input decoupling capacitors while C3 sets the delay time for loud speaker protection. C1 and C2 are power supply filter capacitors.

Car Stereo Amplifier Circuit diagram:

Car stereo amplifier circuit diagram

Car stereo amplifier circuit schematic

Notes :

  • Assemble the circuit on a good quality PCB.
  • Use 12V DC for powering the circuit.
  • The circuit can deliver 22W per channel into 4 ohm speakers.
  • Fit the IC with a proper heat sink.

Check our Other Amplifier Circuits:

1. 50 Watt Mosfet Amplifier

2. 15 Watt Audio Amplifier

3.  Headphone Amplifier

4.  2*60 Watts Audio Amplifier

5. 40 Watts Audio Amplifier Circuit

If you want more Audio circuits, Amplifier Circuits and Automotive circuits – Check our respective categories:

1. Audio Circuits

2. Amplifier Circuits

3. Automotive Circuits

Comments
  • Taufiq
    July 23, 2015

    THIS AMP. IS GOOD IT IS EASY TO ASSEMBLE
    THANKS TO CIRCUITS TODAY!!!

  • July 15, 2015

    Dear Sirs,

    Sorry to bother you.
    We are a specialized manufacturer for car amplifier and capacitor for 18 years in China, could offer you the best competitive prices with high quality and good service.
    If there is anything I can do for you,please don’t hesitate to contact with me.
    Looking forward to working with you in the near future.

    Best Regards,
    Estelle Fan

    Shenzhen Fulais Car Audio Co.,Ltd
    Fulais Prosound Power-Capacitor(H.K)Co.,Ltd.
    Add:Building C, Zhuangbian Industrial Zone, Baoan Road,Baoan District, Shenzhen,China
    Tel:86-0755-21631532 Fax:86-0755-21631523
    Email: fulaisaudio2@126.com
    Skype:estelle.fan
    QQ:1094945146
    Web: http://www.fulaiscaraudio.com(updating)

  • okpala michael
    September 9, 2014

    thanks 4 de ckt sir. it work very well

  • siddhesh naik
    April 21, 2014

    Q.1
    I want to make an electronic circuit of car stereo amplifier. so i want capacitor of 100nF . and i have here 2 capacitors with me 1000uF and o.1uF . which capacitor will give me same effect as 1oonF ?

    Q.2
    on every capacitors tolerance as 100uF and voltage as 10v are mentioned. but i have noticed in same circuit that they have not mentioned voltage of capacitors. which voltage capacitor should i take in this circuit? kindly help me sir.

    • Seetharaman
      April 22, 2014

      100nF is nothing but 0.1uF (1000nF = 1uF) 1000uF is 1000000nF.
      In the car environment it is better to use all capacitors, rated for minimum of 25 volts.

    • MANOHAR SINGH
      January 18, 2016

      DEAR,0.1UF OR 100NF BOTH ARE EQUALLY SAME.

  • migs
    November 22, 2012

    its not labelled with Rin and Lin, but in the drawing its already there!!!

  • john
    April 16, 2012

    where i can put the audio in >?>?? thanks

  • November 6, 2011

    THIS AMP. IS GOOD IT IS EASY TO ASSEMBLE
    THANKS TO CIRCUITS TODAY!!!

  • mayank
    February 2, 2011

    what are various uses of TDA 2003 Other than amplifier?

Leave a Reply to mayank Cancel reply

Your email address will not be published. Required fields are marked *